AFTERBURNER Heat Shield Velcro Sleeve – 1.5 Inch – 3 Feet Pack#ABE53041

Shield your wiring, lines, and cables safe from heat. Forget about that old fire silicone sleeving (450F max); Thermaflect Sleeve acts as a thermal barrier capable of reflecting up to 95 percent of radiant heat away (requires minimum of 1 inch of airspace). It is excellent to use on your fuel lines, wiring looms, air intake, intercooler pipes, and air conditioner hoses. By keeping fuel and air intake temperatures cool it helps to prevent vapor lock, improves performance, improves mileage and also reduces fuel evaporation. Weight there is more; a 3 foot length the Thermaflect Sleeve weighs less than 6 inches of the silicone fire sleeve of the same diameter. Though it weighs much less, it offers superior radiant heat protection. Thermaflect Sleeve withstands 1100F of continuous radiant heat and 500F direct heat.

Specifications :

Part Type: Heat Sleeves

Product Line: Thermo-Tec Express Sleeves

Length : 36.000 in.

Length : 3.00 ft.

Diameter: 1.500 in.

Maximum Ambient Temperature : 2,000 degrees F

Installation: Wraparound

Heat Protection Color: Silver

Quantity: Sold individually.

Installation tips:

Be sure ends of sleeve are sealed or secured to component you are trying to protect. You can seal the ends using our Thermaflect Tape(TM), Cool Foil Tape(TM), Thermal-Tie(TM), shrink tube, or any mechanical fastener. Securing the ends will ensure no hot air sneaks in behind the sleeve, thus allowing it to work more efficiently.

It also functions better if the heat shield sleeve is tight on the component.

Face hook and loop seam on the opposite side of the heat source.